Ball Bearing Stand / Boom Stand

Ball Bearing Stand / Boom Stand

	Stereo Zoom Microscope

	Fixed Power Stereo Microscope

	Student Stereo Microscope

	Compound Microscope

	Portable Microscope

	Ball Bearing Stand / Boom Stand

	Articulated Arm on Table Clamp

	Articulated Arm On Table Stand

	Pole Stand / Track Stand (76mm / 83mm)

	Universal Arm ( B&L )

	Microscope Eyepieces / Video Coupler

	Auxiliary Lenses XTS / XTZ B&L / XTD / SM / SMZ / SZ7

	CCD/USB Digital Camera

	Digital Camera Adapter for Microscope

	Video Inspection Microscope

	Light Source Illumination

	LED Ring Light illuminator

	Fluorescent Ring Light illuminator

	Replacement Bulbs

	International Plugs Adapter

	Darkfield Stage & Jewelry Clip

	Slides / Calibration

	Microscope Carrying Case

	Testimonials / Feedback

Ball Bearing Stand (Double Bar Boom Stand) Base dimension: 385x260x25mm Vertical Post: OD. 37mm, main post 380mm, a 225mm extension post is included A Lock Ring on vertical post for stopping. Horizontal Post: Smooth ball bearing movement, OD. 20mm for each shaft, Long 570mm(end to end), travel distance from vertical post to the end of horizontal post: 15.5-37mm. End of horizontal post has a 5/8'' hole that will fit Universal or Arbor arm

Universal Arm for Microscope (83mm)

5/8inch fitting

The ID 83mm Ring for microscope body

Centerline to centerline 6inch from the fitting to ring

Vertical working distance 54mm (+26, -28)

Focusing hand wheel is adjustable to loosen and tighten

Boom Stand

Boom Stand Base dimension: 385x260x25mm, the max. distance from the vertical post to the end of base: 235mm. The larger and heavy base best to help keep stand more stable. Vertical Post: OD 37mm, main post 380mm, a 225mm extension post can be attached. A Lock Ring on vertical post for stopping. Horizontal Post: OD. 32mm, Long 530mm. We have made three grooves in the horizontal post that keeps it from moving, end of horizontal post with a 5/8'' hole that will fit Universal and Arbor arms.

FOCUSING MOUNT

The vertical working distance 80mm(+69, -11), focusing hand wheel is adjustable to loosen and tighten, the Ring’s ID. 83mm for XTS,SMZ,XTD microscope body, ID 25mm for pole, the centerline to centerline 140mm from ring to hole. If needed, we can also provide you 76mm Sleeve Adapter to fit your 76mm Microscope Pod.

ARBOR

Arbor (Short Pillar for Boom Stand) Post OD. 25mm, Long 200mm, with a 5/8inch fitting. Allows for tilt adjustment 90° and 45° from vertical line. For Boom Stand use on focusing mount.

Table Clamp Boom Stand

Same Specification as the Boom Stand, but will a Clamp

Max Opening is 2"

This stand is convenient to clamp onto the edge of working stable

--The Clamp max. opening 57mm

-Vertical bar: length 380mm/15" OD:37mm/1.4"

--Horizontal bar:length 530mm/20.8" OD:32mm/1.3", with a 5/8"hole that fit Univeral arm or Arbor Arm

Table Clamp for Boom Stand or Ballbearing Stand

This Table Clamp will only fit our Boom Stand Post (32mm)threaded.

Max opening 56mm or 2.2 inch